MULTIZONE SYSTEM
MULTIZONE SYSTEM
MULTIZONE SYSTEM
FOR DETECTION OF GAS LEAKS
FOR DETECTION OF GAS LEAKS
FOR DETECTION OF GAS LEAKS


RFG 100

Power supply 220/240V ~ and/or 12V -.
Constructed in 19" racks with IP20 protection.
Option of using sensors for detecting gas, CO or combustion fumes.
Alarm threshold: 0.3% combustible gas and 0.05% CO in air.
Two SPDT voltage-free output contacts.
Possibility of controlling gas safety shut-off valves N.O. or N.C.

RFG 100

APPLICATION

The RFG 100 multizone system makes it possible to centralise the detection and control of combustible gas, carbon monoxide or combustion fumes in large industrial or non-industrial buildings (laboratories, workshops, garages, canteens, etc.) where numerous monitoring points are required.
RFG 100 consists of:
One or more CRM 284 racks for housing all the electronic units.
One AGS 013 central unit for each rack: this receives the alarm signals from the detector units, switches on the external alarms and activates the safety systems.
One AGS 012 detector unit for each zone: suitable for detecting gas leaks or concentrations of carbon monoxide according to the type of sensor used.

Or:
One AGS 015 detector unit for each zone: suitable for detecting combustion fumes.
One monitoring sensor for each zone: detects the presence of combustible gas or carbon monoxide or combustion fumes according to the type used.
Mounting accessories.


TECHNICAL DATA

Power supply:

Mains
Back-up battery

220/240V ~ ; 40 VAwwwww
12V - ; 1,6 Amp

Voltage-free output contacts:

Type of contacts
Maximum voltage applicable
Maximum capacity

SPDTwwwwwwwwwwwwww
250 Volt
1 Amp

Alarm threshold:

Combustible Gas
CO

0,3% gas in airiwww
0,05% CO in air

Ambient temperature:

Operation
Storage
Protection

0 to 45Cw
-20 to +60C
IP 20


TechnicalSpecificationsRFG100E.PDF
Click here to download
complete Technical Specification

TechnicalSpecificationsRFG100E.PDF (Size 449 Kb) TechnicalSpecificationsRFG100E.PDF

Click here to install
ADOBE ACROBAT READER

Install ACROBAT READER